DYVI 2.3
30 Jan 2023
• Redundant streams for IP-Input and -Output ports are now supported (2022-07 for 2110-20)
• The NMOS-Protocol is now integrated and support the registration of IP-Input and -Output ports and flow control from a Broadcast Controller (IS-04 and IS-05)
• The monitoring of the IP-Output signals was improved
• The configuration for Input- and Output ports was improved
• 2.3 allows to build a hybrid DYVI cluster: Mixing SDI- and IP-PMY’s in a cluster
Please note that as of end of May Technical and User Manuals are no longer uploaded in the Download Area. You can find them on our new Documentation Center on our VIA Portal.
The IP-Addresses of the Ethernet control ports (PMY, GUI-PC, HW-Panel) have been changed for security reasons
• The NMOS-Protocol is now integrated and support the registration of IP-Input and -Output ports and flow control from a Broadcast Controller (IS-04 and IS-05)
• The monitoring of the IP-Output signals was improved
• The configuration for Input- and Output ports was improved
• 2.3 allows to build a hybrid DYVI cluster: Mixing SDI- and IP-PMY’s in a cluster
Please note that as of end of May Technical and User Manuals are no longer uploaded in the Download Area. You can find them on our new Documentation Center on our VIA Portal.
The IP-Addresses of the Ethernet control ports (PMY, GUI-PC, HW-Panel) have been changed for security reasons
- This version is only compatible with PMY G4 hardware
- The audio on SDI support requires 2.2 SDI I/O Boards with additional power chords and specific BIOS parameters. Please contact EVS Support to use audio on SDI with Dyvi 2.2
- When upgrading from v2.0.6.x, it’s necessary to upgrade the Dyvi PMY and Control Panel to the v2.0.7.2 version first before upgrade these to v2.2
- The Live IP support requires 3.0 IP I/O Boards
- A new BIOS version and settings for PMY is needed since DYVI 2.0.7 (Please contact EVS Support)
- I/O Boards CPLD version must be v7 or above
- Since v2.0.7.1, it is necessary to perform a new configuration to allow DYVI render “user” or “custom” fonts. Please see the User Manual page 80 (DYVI-5460)
- The FTP server port on the PM is now 10021 instead of 21. Do not forget to modify your FTP client parameter accordingly (Filezilla). See the user manual, section 2.9.8, for more details.
- We strongly advise to make a backup of all existing productions before upgrading to v2.2. Indeed, the older production versions are upgraded to the v2.2 format when the “save” button is pushed.
- The audio on SDI support requires 2.2 SDI I/O Boards with additional power chords and specific BIOS parameters. Please contact EVS Support to use audio on SDI with Dyvi 2.2
- When upgrading from v2.0.6.x, it’s necessary to upgrade the Dyvi PMY and Control Panel to the v2.0.7.2 version first before upgrade these to v2.2
- The Live IP support requires 3.0 IP I/O Boards
- A new BIOS version and settings for PMY is needed since DYVI 2.0.7 (Please contact EVS Support)
- I/O Boards CPLD version must be v7 or above
- Since v2.0.7.1, it is necessary to perform a new configuration to allow DYVI render “user” or “custom” fonts. Please see the User Manual page 80 (DYVI-5460)
- The FTP server port on the PM is now 10021 instead of 21. Do not forget to modify your FTP client parameter accordingly (Filezilla). See the user manual, section 2.9.8, for more details.
- We strongly advise to make a backup of all existing productions before upgrading to v2.2. Indeed, the older production versions are upgraded to the v2.2 format when the “save” button is pushed.
